Transport protection excavator chain protection track driven vehicles 200 g/m²

For a set (pair) please order 2 pieces!
 
Transport protection excavator track chain guard | for tracked vehicles, e.g. excavators, caterpillars, climbers.
 
This protective tarpaulin was developed explicitly for tracked vehicles and construction machines with crawler tracks. It serves primarily as a dirt trap during transport journeys and thus ensures greater safety in road traffic. The covers are simply pulled over the tracks and fastened by means of tensioning elements. We recommend our tarpaulin tensioners with two hooks for this purpose.
 
Here you can order our chain guard in rectangular form.
 
Simply enter the length x width (depth) x height of the desired excavator chain guard. We recommend the chain dimension + 10 cm as the bonnet dimension.
 
Special shapes, such as trapezoidal or oval, are also possible. Please use our form for an enquiry, which can be found under the "Downloads" tab above this description, or send us a dimensioned sketch.
 
We are also happy to manufacture the canopy from waterproof PVC tarpaulin in various colours - please use our contact form for enquiries.
 
Note: Quantity discount for the purchase of certain quantities.
from 4 pieces -> 2 %
from 7 pieces -> 4 %
from 11 pieces -> 5 %

Material: PE | polyethylene
Characteristics: flynet structure, high-strength, stiff, stable, abrasion-resistant, permeable to air, versatile use
UV radiation: stable
Fabric Type: Monofilament fabric
Basis weight: 200 g / m²
Material thickness: Info follows
Color: Green, Blue, Red, Black, Gray
Rubber rope: as desired
Rubber rope thickness Ø: 8 mm (up to 7 m tarpaulin length) | 10 mm (from 7 m tarpaulin length)
Hem: Yes | The padded hem reduces tearing of the eyelets.
Hem sides: circumferential
Hem width: on average approx. 70 mm
Eyelets: Yes
Type of eyelets: round eyelets
Ø eyelets: 16 mm
Eyelet spacing: approx. Every 400 mm
Certification: DEKRA, based on VDI 2700 sheet 3.3
Production: Germany