Standard heavy duty waterproof stable tarpaulin PVC 630g /m²

Waterproof, stable PVC tarpaulin 630 g/m²

This PVC tarpaulin is used for the waterproof transport of bulk or piece goods, cartons or pallets, on containers, lorries and 3.5-tonne vans with a loading area. The heavy quality of 630 g/m² is based on the basis weight of lorry tarpaulins and is robust, hard-wearing and durable. As these tarpaulins are welded and not sewn, absolute impermeability is guaranteed even with oversized tarpaulins. Available in the colours red, orange, white, yellow, blue, green, black or grey and with eyelets every 40 cm as standard, the tarpaulin is suitable for use on municipal vehicles (municipal service), for example, thanks to the consistent colour scheme.

In the version offered here, the material is suitable for roll-off and skip containers and can also be used as an outdoor cover in a variety of ways (e.g. for floor-standing containers with non-environmentally friendly contents).

 

You can purchase the PVC tarpaulin from us in the standard sizes offered, suitable for all standard roll-off and skip containers, or customised to your individual dimensions, with or without a rubber cord. We also offer a 900 g version of this protective tarpaulin in grey.

Production note: Depending on the tarpaulin size ordered and the available roll width of the raw material, there may be joining or welding seams on the production side. Please ask us in advance in individual cases.

Material

PE | polyethylene / PVC | polyvinyl chloride

Characteristics

Dimensionally stable, waterproof (even with oversizes), hard-wearing, robust, universally applicable,

lorry tarpaulin quality

Surface

coated with PVC | polyvinyl chloride

UV radiation

stable up to 600 kLy | approx. 6 years

Surface weight

630 g/m²

material thickness

Info follows

Colour

Carmine red, deep orange, pure white, traffic yellow, opal green, ultramarine blue, deep black, light grey, eco grey

Rubber cord

pulled in as required

Hem

Yes

Hem sides

all round

Hem width

approx. 70 mm on average

Eyelets

Yes | all round

Eyelet type

Round eyelets

Ø eyelets

16 mm

Eyelet spacing

approx. every 400 mm

Tensile strength

approx. 2000/2000 N

Temperature resistance

-40 °C to +70 °C

Adhesive strength

15 N/cm

Burning behaviour

ISO 3795 approx. 100 mm/min

Certification

DEKRA, in accordance with VDI 2700 Sheet 3.3

Manufacturing

Germany, Germany

Quantity discount

from 4 pieces -> 2 %

from 7 pieces -> 4 %

from 11 pieces -> 5 %