Light water resistant tarpaulin PE 260g /m²

Lightweight waterproof PE tarpaulin container tarpaulin 260 g/m² | High UV resistance 500 kly

This inexpensive and, above all, lightweight alternative to heavy PVC is made from a thickly coated HDPE fabric and is completely waterproof in any width or length you choose. This two-coloured fabric is a hard-wearing, extremely UV-resistant (500 kly) and stable protective tarpaulin that can also be used as a transport cover for short distances and speeds (e.g. in urban areas). The HDPE tarpaulin is also intended as a cover for floor-standing containers, as well as weather protection for firewood or garden furniture in the private or business sector.

Colours:
If you choose the colour black, the top of the tarpaulin is completely black and the underside is green with a black seam (see gallery).
If you choose the colour green, the top side of the tarpaulin is completely green, the underside is black with a green hem (see gallery).

This HDPE fabric is available in freely configurable special sizes, with or without tensioning rope.

Practical tip: Recommended tarpaulin and net size for skip and roll-off containers

Container size Outer dimensions Tarpaulin size Net size

Skip skips    
5 m³ approx. 1.7 x 3.3 m 2.3 x 4.0 m 3.0 x 5.0 m
7 m³ approx. 1.7 x 4.0 m 2.3 x 4.5 m 3.0 x 5.0 m
10 m³ approx. 1.7 x 4.5 m 2.3 x 5.0 m 3.0 x 5.0 m

Roll-off container    
12 m³ 18 m³ 20 m³ approx. 2.5 x 6.3 m 3.1 x 7.0 m 3.5 x 7.0 m
30 m³ approx. 2.5 x 6.8 m 3.1 x 7.5 m 3.5 x 8.0 m
38 m³ 40 m³ approx. 2.5 x 7.3 m 3.1 x 8.0 m 3.5 x 8.0 m

Material: HDPE
Characteristics: water resistant, not air permeable, high UV resistance, light, inherently stable, not stretchable
UV radiation: stable 500 kLy
Fabric Type: coated
Basis weight: 260 g / m²
Material thickness: Info follows
Color: Green, Black | 2-colour material (top/bottom)
Rubber rope: as desired
Rubber rope thickness Ø: 8 mm (up to 7 m tarpaulin length) | 10 mm (from 7 m tarpaulin length)
Hem: Yes | The reinforced hem reduces tearing of the eyelets.
Hem sides: circumferential
Hem width: on average approx. 70 mm
Eyelets: Yes
Eyelet type: round eyelets
Ø eyelets: 16 mm
Eyelet spacing: approx. Every 400 mm
Certification: DEKRA, based on VDI 2700 sheet 3.3
Production: Germany